澳门威斯尼斯人网址

澳门威斯尼斯人网址-澳门威斯尼斯人娱乐网[v29]

您的位置:首页 > 新闻资讯 >

澳门威斯尼斯人网址防止铝板折弯时形成损坏的措施

来源:

  我们在进行铝板的装饰中,很多时分要将其折弯,这完整不是成心的行为,而是工程装置需求.但是有时分铝单板会由于折弯过度而这段,以至报废,发作这种状况就糜费了一块铝单板,因而我们澳门威斯尼斯人网址要想方法防止这种情况呈现,那么如何才能防止铝单板由于折弯而报废呢?
  In the process of aluminum plate decoration, we need to bend it a lot of time, which is not intentional behavior, but the demand of engineering devices. But sometimes the aluminum plate will be bent excessively, and even be scrapped, which will cost a piece of aluminum plate. Therefore, we need to find ways to prevent this situation, so how can we prevent the aluminum plate from being scrapped due to bending?
  1、铝型材挤压调直:调直是铝型材形成弯曲很严重的环节,调直工人一定要十分留意调直所用的力度,力气过大就可能会对型材产生变形、收口、桔皮等,力气过小就会产生型材调不直,形成弯曲.
  1. Extrusion straightening of aluminum profile: straightening is a very serious link in the formation of bending of aluminum profile. Straightening workers must pay great attention to the strength used for straightening. If the strength is too large, the profile may be deformed, folded, orange peel, etc., and if the strength is too small, the profile will not be straightened, forming bending

澳门威斯尼斯人网址
  2、铝型材挤压装框:这环节也是十分重要,锯完定尺长度后,铝单板就要进行装框,这时装框工就要留意了:这料是大料还是小料,是带管料还是平面模拉出来的料?普通来说,大料和带管的料抬两端装框不容易形成弯曲,但小料战争面模拉出来的料,抬两端就很容易形成弯曲,这时就应该从两端向中间靠拢进行抬料装框.
  2. Aluminum profile extrusion and framing: this link is also very important. After sawing the fixed length, the aluminum veneer will be framed. The fashion frame workers should pay attention to whether this material is large material or small material, and whether it is material with tube or drawn by plane die. Generally speaking, it is not easy to form bending when the material with tube is lifted and framed at both ends, but it is easy to form bending when the material with small material is pulled out by plane die, At this time, it is necessary to move from both ends to the middle for loading and framing
  3、铝板外表处置上架:坯料经时效,硬度已达标,型材就没那么容易变弯曲,但上架时还是要留意,两端抬料时,尽量防止上下鼎力动摇,鼎力动摇也会对已时效的铝单板形成一定的弯曲。
  3. Surface treatment of aluminum plate on the shelf: after aging, the hardness of the blank has reached the standard, and the profile is not so easy to bend, but attention should be paid to when putting it on the shelf. When lifting the material at both ends, try to prevent the upper and lower parts from shaking vigorously, which will also form a certain bending on the aged aluminum plate.
  以上是介绍的澳门威斯尼斯人网址防止铝板折弯时形成损坏的措施,想要了解更多内容,欢迎访问网站:
  The above are the measures to prevent damage caused by bending of aluminum plate. For more information, please visit

在线咨询
澳门威斯尼斯人网址-澳门威斯尼斯人娱乐网[v29]